FAQs

At AT Precision, we manufacture all our products in-house and supply direct to fabricators, meaning our customers can access high quality products at a very affordable rate. In fact, a fabricator making 10 bi-folds per week could save themselves £1,200 a week, or £60,000 a year, by coming direct to AT Precision.

Yes, all our products are compatible with most major systems. Get in touch with our technical team who will be happy to assist.

Not at all. Our prices may be lower than our competitors, but that doesn’t mean we offer an inferior product. Our products are manufactured using cast aluminium – which is much better quality than the zinc-based hardware you find on the market. We also employ stringent quality checks at all levels of the manufacturing process.

If you place or order before 1pm, we guarantee next day delivery. We always have at least three months’ worth of stock in our warehouse, meaning we’re never short of supply.

Yes. All our products are PAS24:2016 accredited, while our entire Everglide range of aluminium bifold hardware has been salt spray tested, achieving the maximum 480-hour cycle time required for a Grade 5 on the BSEN1670 scale.

If we don’t stock the product you’re looking for, please send us a sample, or a list of the specifications, and we will gladly have it made up for you.

Crimping cleats allow for speedy installation by clipping into the outer frame, with no need for screws or fixings.

Yes, our crimping cleats are compatible with all major systems, saving you time and hassle.

Mechanical cleats are required for easy assembly of the aluminium framing. AT Precision supplies these drilled and tapped, or with tension blocks if required.

Our cleats, like all our bi-fold hardware, are made from extruded aluminium, and are compatible with all major systems.

If you can’t find the exact cleat you’re looking for, we can use our in-house cleat cutting machinery to manufacture bespoke cleats for your specific needs.

Because we manufacture our cleats in-house, we’re able to offer them at a much more affordable rate compared to other suppliers. Call us today to get affordable products today, without compromising on quality.

No, we don’t manufacture the Ingenious Duplex Lock in-house. Instead, we have sourced this from leading security company Ingenious Locks and Hardware. This multi-point lock has really enhanced our range, and adding it to our product portfolio was an easy decision to make.

We not only offer on-site demonstrations of all our products, but should any of our customers experience a problem with one of our products, we’re always happy to travel out to them, no matter where they are in the UK, to provide them with assistance.

The Everglide sliding door lock is a high-performance patio door lock that features bi-directional locking technology for inline sliding doors.

If you place or order before 1pm, we guarantee next day delivery. We always have at least three months’ worth of stock in our warehouse, meaning we’re never short of supply.

At AT Precision, we manufacture all our products in-house and supply direct to fabricators, meaning our customers can access high quality products at a very affordable rate. In fact, a fabricator making 10 bi-folds per week could save themselves £1,200 a week, or £60,000 a year, by coming direct to AT Precision.

Yes. All our products are PAS24:2016 accredited, while our entire Everglide range of aluminium bifold hardware has been salt spray tested, achieving the maximum 480-hour cycle time required for a Grade 5 on the BSEN1670 scale.

Yes, all our gaskets are compatible with most major systems. Get in touch with our technical team who will be happy to assist.

If we don’t stock the gasket you’re looking for, please send us a sample, or a list of the specifications, and we will have specific tooling made to meet your exact needs.

Our PVC infill extrusion profiles are used to create a euro groove on the bifold sash, or to infill sections of the bifold, creating a better appearance to the end user.

Yes, our PVC infill extrusions are compatible with most major systems. Get in touch with our technical team who will be happy to assist.

Yes, Everglide profile is of the same quality as the profile you’d find from a systems company or other supplier. Rest assured that when you come to AT Precision, you won’t be compromising on quality.

Yes, we have an in-house specialised extrusion machine to manufacture a thermal break, creating a continuous barrier between the inner and outer frames to prevent conductive thermal energy loss.